Vol. 1 (2020): SEE-LS: A 4th Generation Synchrotron Light Source forScience and Technology

View Vol. 1 (2020): SEE-LS: A 4th Generation Synchrotron Light Source forScience and Technology

Editor: Dieter Einfeld 

In 2016 the South East Europe International Institute for Sustainable Technologies was proposed by Herwig Schopper and brought to the political level by Sanja Damjanović, Minister of Science of Montenegro. In this framework two design studies have been completed by two groups of European experts: a South East Europe ‘4th Generation Synchrotron Light Source for Science and Technology’ (SEE-LS) and a ‘Facility for Tumour Hadron Therapy and Biomedical Research’. This report concerns the SEE-LS study, which was completed in October 2018. The proposal is to build a 4th generation light source with a circumference of 350 m and 16 straight sections and with an emittance of 178 pmrad for an energy of 2.5 GeV. In a later stage, the machine could be upgraded to 3 GeV. The estimated budget is roughly  170 million Euro, and the first X-rays should be produced in six years. Readers who are not interested in the details can refer to the Executive Summary.

DOI: https://doi.org/10.23731/CYRM-2020-001

Full Issue

  • Table of contents

    - -
    v
    DOI: https://doi.org/10.23731/CYRM-2020-001.v

  • Executive summary

    S. Damjanović, H. Schopper
    1
    DOI: https://doi.org/10.23731/CYRM-2020-001.1

  • Synchrotron radiation

    Ch. Quitmann, T. Rayment
    5
    DOI: https://doi.org/10.23731/CYRM-2020-001.5

  • Layout of a synchrotron light source

    D. Einfeld
    19
    DOI: https://doi.org/10.23731/CYRM-2020-001.19

  • Lattice considerations

    D. Einfeld
    25
    DOI: https://doi.org/10.23731/CYRM-2020-001.25

  • Beam dynamics and layout of the SEE-LS

    D. Einfeld, H. Ghasem
    43
    DOI: https://doi.org/10.23731/CYRM-2020-001.43

  • Components of the SEE-LS

    Ch. Benabderrahmane, G. Le Bec, J. Chavanne, D. Einfeld
    59
    DOI: https://doi.org/10.23731/CYRM-2020-001.59

  • Magnets of the storage ring

    Ch. Benabderrahmane, G. Le Bec, J. Chavanne, D. Einfeld
    61
    DOI: https://doi.org/10.23731/CYRM-2020-001.61

  • Girder system

    J.-C. Biasci, D. Einfeld
    75
    DOI: https://doi.org/10.23731/CYRM-2020-001.75

  • Vacuum system

    E. Al-Dmour
    81
    DOI: https://doi.org/10.23731/CYRM-2020-001.81

  • Radio-frequency (RF) system

    A. Andersson, D. Einfeld, F. Perez, A. Salom
    89
    DOI: https://doi.org/10.23731/CYRM-2020-001.89

  • Power supplies

    J.-F. Bouteille, D. Einfeld
    105
    DOI: https://doi.org/10.23731/CYRM-2020-001.105

  • Diagnostic system

    F. Perez
    111
    DOI: https://doi.org/10.23731/CYRM-2020-001.111

  • Front end

    D. Einfeld
    123
    DOI: https://doi.org/10.23731/CYRM-2020-001.123

  • Injector

    D. Einfeld
    131
    DOI: https://doi.org/10.23731/CYRM-2020-001.131

  • Control system

    D. Fernandez
    139
    DOI: https://doi.org/10.23731/CYRM-2020-001.139

  • Building, infrastructure, and site

    D. Einfeld
    157
    DOI: https://doi.org/10.23731/CYRM-2020-001.157

  • Organization

    163
    DOI: https://doi.org/10.23731/CYRM-2020-001.163

  • Project schedule

    165
    DOI: https://doi.org/10.23731/CYRM-2020-001.165

  • Training programme

    A. Nadji
    167
    DOI: https://doi.org/10.23731/CYRM-2020-001.167

  • Cost estimation

    D. Einfeld
    169
    DOI: https://doi.org/10.23731/CYRM-2020-001.169

  • Appendix A: Synchrotron radiation characteristics

    D. Einfeld
    171
    DOI: https://doi.org/10.23731/CYRM-2020-001.171